KEY BENEFITS:

• Real time video for per torch with auto focus and zoom control

• For all torch real Time Actual Welding voltage and Current on the HMI Scope

• For all torch real time able to change Welding Voltage, Welding Current, AVC Set Voltage, Wire feed speed, Gas Flow.

• Wire Stick Alarm, Power Source Alarm, High Voltage Alarm, Cooling Alarm, Gas Alarm. Servo Alarm, Wire Finish Alarm, High Current Alarm, etc..

• Useful HMI Interface

• Faster deposition

• 2 dual tungsten welding torch with twin wire ,4  Power Source and 4 Hot wire unit.

 

FEATURES:

• 4 power sources 450 A %100 duty Cycle

• 4 Hotwire unit 200 A %100 duty Cycle

• All torch has Automatic Voltage Control

• All torch has HF (High Frequency) start.

• 4 wire spool and all wire spool capacity 250 kg total 1.000 kg wire charge. (picture 1)

• All axes Servo motor and controlled by motion control unit

• Water cooling system for each torches

• 120 degrees turn able C axis for each torch. 

• Two wire feed for each torch and each one automatically work following welding direction (Picture 3)

• Special design table for water wall tube. With this very easy to load water wall tube (Picture 4)

• Auto support and pushing system for setting water wall tubes.

• Auto exchange tube plugging system for Water wall tube cooling***

• 0.5” to 4” water wall tube can be cladding

• Water Wall tube Length Maximum 13000mm

•With 2 torch max 1500 mm/min welding

• All torch able to start with High Super Pulse

• 21’’ HMI touch Screen both of side

​

Two wire feed for each torch and each one automatically work following welding direction. Wilclad water wall tube cladding station designed for non stop welding. For the GTAW welding  very important point wire should be follow welding direction. On the water wall tube cladding process each cycle need to change wire direction. For this our system has 2 wire. Automatically change active wire following welding direction. This system getting very big advantage for quality and timing.